AEGLIX vulnerability intelligence
CVE-2026-43363
MEDIUM · CVSS 5.5 · Analyzed
Published: 2026-05-08 · Updated: 2026-11-11 · Source: NVD
Stored catalog record
Source record retrieved 2026-11-11T22:14:43.571859+00:00. Scheduled imports handle updates; this page does not assert that the provider was queried just now.
Continue your research
Connect this record to stored reporting, reviewed campaign mentions and source-domain investigation. These are research leads, not inferred attack relationships.
Open CVE research in Investigate · Find Arsenal listings referencing this CVE
Vulnerability overview
In the Linux kernel, the following vulnerability has been resolved: x86/apic: Disable x2apic on resume if the kernel expects so When resuming from s2ram, firmware may re-enable x2apic mode, which may have been disabled by the kernel during boot either because it doesn't support IRQ remapping or for other reasons. This causes the kernel to continue using the xapic interface, while the hardware is in x2apic mode, which causes hangs. This happens on defconfig + bare metal + s2ram. Fix this in lapic_resume() by disabling x2apic if the kernel expects it to be disabled, i.e. when x2apic_mode = 0. The ACPI v6.6 spec, Section 16.3 [1] says firmware restores either the pre-sleep configuration or initial boot configuration for each CPU, including MSR state: When executing from the power-on reset vector as a result of waking from an S2 or S3 sleep state, the platform firmware performs only the hardware initialization required to restore the system to either the state the platform was in prior to the initial operating system boot, or to the pre-sleep configuration state. In multiprocessor systems, non-boot processors should be placed in the same state as prior to the initial operating system boot. (further ahead) If this is an S2 or S3 wake, then the platform runtime firmware restores minimum context of the system before jumping to the waking vector. This includes: CPU configuration. Platform runtime firmware restores the pre-sleep configuration or initial boot configuration of each CPU (MSR, MTRR, firmware update, SMBase, and so on). Interrupts must be disabled (for IA-32 processors, disabled by CLI instruction). (and other things) So at least as per the spec, re-enablement of x2apic by the firmware is allowed if "x2apic on" is a part of the initial boot configuration. [1] https://uefi.org/specs/ACPI/6.6/16_Waking_and_Sleeping.html#initialization [ bp: Massage. ]
Patch review priority
Assess exposure and vendor guidance
- No higher-priority signal is available in the current stored evidence.
FIRST EPSS: 0.12% · percentile 2.1 · score date 2026-11-18.
EPSS estimates probability of exploitation in the next 30 days. It does not measure your exposure or prove exploitation. The elevated threshold is 10%; CISA KEV takes precedence. About FIRST EPSS ↗
Severity and scoring
- CVSS score
- 5.5 · MEDIUM
- CVSS version
- 3.1
- CVSS vector
- CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
- Weaknesses
- NVD-CWE-noinfo
CVSS measures technical severity; it does not establish whether this vulnerability is being exploited in your environment.
Known exploitation and remediation
Not listed in the CISA catalog retrieved for this record. This does not establish that exploitation has not occurred.
Verify affected versions and patch availability in the vendor advisory before making changes.
Affected products and versions
cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*
From (inclusive): 2.6.28
Before (exclusive): 5.10.253
cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*
From (inclusive): 5.11
Before (exclusive): 5.15.203
cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*
From (inclusive): 5.16
Before (exclusive): 6.1.167
cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*
From (inclusive): 6.2
Before (exclusive): 6.6.130
cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*
From (inclusive): 6.7
Before (exclusive): 6.12.78
cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*
From (inclusive): 6.13
Before (exclusive): 6.18.19
cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*
From (inclusive): 6.19
Before (exclusive): 6.19.9
cpe:2.3:o:linux:linux_kernel:7.0:rc1:*:*:*:*:*:*
cpe:2.3:o:linux:linux_kernel:7.0:rc2:*:*:*:*:*:*
cpe:2.3:o:linux:linux_kernel:7.0:rc3:*:*:*:*:*:*
These are NVD CPE applicability entries. Some products depend on configuration conditions; consult the official record to confirm applicability.
Advisories and references
- https://git.kernel.org/stable/c/11712c4eb384098db4cb08792e223c818b908c1a
Patch
- https://git.kernel.org/stable/c/1a85f84214f9d790216547ac6086bf8033cd9e5a
Patch
- https://git.kernel.org/stable/c/1d8440c1e7c49715f937416ac90cf260f1f1712c
Patch
- https://git.kernel.org/stable/c/3dd0812a7c764cd8f3b0182441ac22da0a7f3b09
Patch
- https://git.kernel.org/stable/c/8cc7dd77a1466f0ec58c03478b2e735a5b289b96
Patch
- https://git.kernel.org/stable/c/965289b120cc68cca886c75219c68b8c15751d73
Patch
- https://git.kernel.org/stable/c/a6ad6f2e31b524cbb66b2f370bad0cf17d327e6c
Patch
- https://git.kernel.org/stable/c/f591938072115bf08730b8530c67fab189cc6308
Patch